The Chief’s Daughter Mono

From $153.00

Calculate Price to order a free preview your blind, order a sample and add to cart

0000mm width x 0000mm drop
Blind material selected

Price: $000.00
- +

We recommend that you order a sample of your blind before you add to cart

The Chief’s Daughter Mono

This intricate design is full of details and overlapping stories that depict the protective embracing of the chief’s daughter.

This mono option can provide an ideal contrast to a light coloured wall and can allow the blind to draw the eye as a feature of any room. Similarly, dark blinds can work just as well against a dark wall by providing a feeling of warmth for the room.

This pattern comes in screen, light filtering and blockout blind materials. If you require custom colours for your blind, please contact us.

Full Technical Specifications

FAST & RELIABLE DELIVERY

Delivery is standard $35 for orders under $299. Delivery is free for orders over $299.

All of our blinds are Australian made, so you can expect delivery within 12 business days. During busy periods our delivery time frames can extend out to 15 business days however we will be sure to let you know if this is likely to happen.

 

COVERING ALL OF AUSTRALIA

We use reputable delivery companies that cover everywhere in Australia. For a small number of remote locations there may be supplementary charges on top. In this instance we will contact you once you have placed your order to determine the most cost efficient way to ship to you.

Full Delivery Information and Delivery FAQs

Measuring for Recess Fitting

Recess fitting is appropriate if you want your blind to be installed inside the window recess. This allows your window frame to be exposed and gives a ‘built-in’ look. To take the measurements for your blind, measure the full width and height of the recess [the size of the hole] and we will make the appropriate deductions to ensure your blind fits perfectly.

Please note that for recess fitting blinds, there will be a small gap (roughly 15mm) at the top, left and right sides which will allow a small amount of light in. This is due to the fitting of the blind bracket. For more effective room darkening we suggest choosing a face fitting blind. Please see information below regarding face fitting.

Tips:
Please use a metal tape measure. Plastic ones and cloth ones can sometimes give inaccurate measurements.
Take measurements in millimetres
Take your measurements in at least 3 places for both the width and the drop. Use the smallest measurements when you enter into our website.
Don’t make any deductions, we will do that for you to ensure your blind fits perfectly
Always double check your measurements

 

Measuring for Face Fitting (Measuring for an Architrave)

Face fitting is where the blind is installed to the face of the window (as opposed to inside the window recess).

When you want to fit the blind to the window’s architrave, measure the width from the outer edge of the architrave to the opposite edge. Then measure the drop from the top of the architrave to where you would like the blind to finish.

When producing your blind, we do not take any deductions from your measurements. The blind will be produced to your measurements.

Tips:
Please use a metal tape measure. Plastic ones and cloth ones can sometimes give inaccurate measurements.
Take measurements in millimetres
Always double check your measurements

 

Measuring for Face Fitting (Measuring for Square Set)

This is the measurement you need to take if you want the blind to hang outside the recess overlapping the window (where there is no window architrave). In this case we will make the blind to your specified size with no deductions.

Measure the exact width of the area you would like the blind to overlap. To minimize light leakage we recommend that the blind overlaps the window recess by at least 70mm at the top and 50mm each side. We will produce the blinds to the exact measurements you provide to us.

The overlap at the bottom of the blind is a matter of personal choice but if you are measuring for a blind that will come down to the floor allow 10-20mm of clearance.

Tips:
Please use a metal tape measure. Plastic ones and cloth ones can sometimes give inaccurate measurements.
Take measurements in millimetres
Always double check your measurements

Our blinds are very easy to install however if you would prefer a specialist installer complete this process, please get in touch with us. We have a network of specialists who can assist.

What you will need to complete the fitting is a drill, appropriate drill bit, phillips screw driver, pencil, level, plasterboard anchors (if you are going to be screwing into plasterboard, you will need to first install plasterboard anchors and then insert your screws into them).

Some other important considerations before installing your blinds include the need for having clean hands and wiping surface areas prior to unwrapping the blind. Blind fabric is susceptible to marking from dirt, dust and oils so please take every precaution when installing.

Finally it’s important to note that installation of the blind should not occur to surfaces where water damage, rotting or other damaged has taken place.

 

How to Install Blinds Step 1Step 1:

Upon receiving your delivery, unpack the blind and lay out in front of the window where the blind is being applied.

When you originally placed your order you selected your blind to fix to the face of the window (face-fitting) or top fix inside the window recess (recess fitting). The brackets included in your order enable you to apply brackets as per graphic.

 

How to Install Blinds Step 2Step 2:

Mark where your pilot holes will be. Place the bracket against the wall where you want it to go and use a pencil to mark where you will be inserting the screws that have been supplied with your blind.

Drill pilot holes for timber screws or appropriate sized holes for your plasterboard anchors.

Screw the bracket into place. If you are using anchors, you will need to gently tap them into the plasterboard first.

Complete process for both sides.

PLEASE NOTE: it is imperative that when fixing brackets they are completely level before attaching blind. This will require the use of a level to check once brackets have been installed.

 

How to Install Blinds Step 3Step 3:

Once brackets have been supplied to the window area, locate the pin at the opposite end to the blind chain control and insert into the bracket first. Then fit the control end into the other bracket.

PLEASE NOTE: upon fitting the blind please ensure that the blind is rolled up.

 

How to Install Blinds Step 4Step 4:

PLEASE READ THE FOLLOWING POINT REGARDING CHILD SAFETY:
All of Blinds in Print blinds are provided with a compliant child safety device which must be installed when you install your blind. In Australia this is required by law.

When attaching the chain safety bracket, allow the chain to drop to its natural height and secure safety bracket to the wall or frame under a small amount of tension using the screw supplied. It is important that once fixed the chain is not freely looping rather is pulled reasonably taught.

For more information visit the ACCC’s website page on the installation of corded internal window coverings.

 

Step 5:

Test the blind by lowering and raising it a couple of times. Congratulations, you have successfully completed your Blinds in Print blind installation!